Options Installed - Konica Minolta Magicolor 5550 Reference Manual

Parameters
Image RGB Intent
Image RGB Source

Options Installed

Parameters
Duplex Unit
Output Tray Unit
Paper Source Unit
Printer Memory
Storage
Specifying Printer Driver Settings
Settings
Specifies RGB intent for image as Vivid,
Photographic, Relative Color, or Absolute
Color.
The default setting is Photographic.
Specifies RGB source for image as None,
sRGB, Adobe RGB (1998), Apple RGB,
ColorMatch RGB, or Blue Adjust RGB.
The default setting is sRGB.
Settings
Select Enable if the optional duplexing unit
for the printer has been installed.
The default setting is Disable.
Select Enabled if the output tray unit (staple
finisher) is installed. Select Disabled if it is
not installed.
The default setting is Disabled.
Select Unit 3 or Unit 3 + Unit 4 if the optional
trays for the printer have been installed.
The default setting is Disable.
Select 256 MB, 512 MB, 768 MB, or
1024 MB if the optional memory for the
printer has been installed.
The default setting is 256 MB.
Select None, CF (1GB Under), CF (1GB
Over), HDD, HDD + CF (1GB Under) or
HDD + CF (1GB Over) for the storage unit
that is installed.
The default setting is None.
89