When The Print Quality Is Low - Kyocera KM-C2230 User Manual

12
12.1

When the Print Quality Is Low

Symptom
The printed output is too light.
The printed output is too dark.
The printed output is blurry.
12-2
12.1 When the Print Quality Is Low
Possible Cause
The copy density is set too
light.
The paper is damp.
The copy density is set too
dark.
The document was not
pressed close enough against
the original glass.
The paper is damp.
The document was not
pressed close enough against
the original glass.
Remedy
Select a darker Density
setting. (See page 3-45.)
Replace the paper. (See
page 2-26, page 2-31,
page 2-33, page 2-35.)
Select a lighter Density setting.
(See page 3-45.)
Position the document so that
it is pressed closely against the
original glass. (See
page 2-44.)
Replace the paper. (See
page 2-26, page 2-31,
page 2-33, page 2-35.)
Position the document so that
it is pressed closely against the
original glass. (See
page 2-44.)