Kyocera KM-C2230 User Manual page 487

14
Then, select a Photo/Density setting where the "Text Enhancement" setting has no
effect on, such as with the "Photo Paper" setting.
Next, select a Photo/Density setting where the "Text Enhancement" setting can be
specified, such as with the "Text" setting (34) or the "Map" setting (36). The
previously specified "Text Enhancement" setting of "+3" (Darker) is maintained.
*: The "Centering" function from the Utility mode can be set, but will not be applied.
:Possible only with paper sizes of Letter L and A4 L
:Although the settings can be selected at the same time, they cannot technically
be combined.
Number of First Number of Next
Setting Setting
1 60, 61
60, 61 1
4 84, 85, 88
84, 85, 88 4
40 14~21
50, 52, 54, 55, 13~21
56, 57
25, 28 70
70 25, 28
77 66, 71
66, 71 77
60, 61 79
70 79
66, 69, 70, 71 92
92 66, 69, 70, 71
93 13~21
14-32
14.3 Function Combination Table
Description
Number of copies:
If the "Non Sort" setting and a stapling setting are set and the
entered number of copies exceeds the number allowed with the
stapling setting, a message warning that the number of copies for
stapling has been exceeded. If the warning is ignored and the job is
started, the stapling setting is canceled.
"Auto Color" Color setting:
The functions cannot be combined with the "Auto Color" setting.
However, if the "Auto Color" setting determines that the "Black"
Color setting should be used, printing continues without the settings
for the Color Image Adjust parameters applied.
1st drawer (multipurpose paper drawer):
The functions cannot be combined if a paper size that cannot be
loaded into the 1st drawer is selected.
A message appears, warning that the 1st drawer is selected and the
paper type was changed.
"Multi-Page Enlargement" function:
The zoom ratio specified for the "Multi-Page Enlargement" function
is applied.
"Multi-Page Enlargement" function:
A zoom ratio cannot be specified.
"Mixed Original" function:
The function can be selected, but the setting is not applied.
Interrupt mode:
With the stapling setting on finisher DF-626, printing is interrupted
between copy sets to interrupt the job.
Interrupt mode: The job cannot be interrupted while scanning while
using the "Multi-Page Enlargement" function.
"Centering" function:
The function can be selected, but the setting is not applied.
"Mode Store" function: A program using the 1st drawer cannot be
stored.