To Store A Non-Standard (Custom) Paper Size - Kyocera KM-C2230 User Manual

3.6 Selecting a Paper/Size Setting
6
Touch [Y].
7
Touch and
❍ Touch [Y] until the cursor moves below the digit that you wish to change.
8
Touch [Enter].
The paper size for the 1st drawer is set.

To store a non-standard (custom) paper size

Two non-standard paper sizes can be stored. Storing paper sizes that are used often
enables the paper size to be quickly selected, without having to re-enter the setting.
The following procedure describes how to store a size for non-standard paper
loaded into the 1st drawer.
1
Touch [Paper/Size].
A screen appears, showing the available Paper/Size settings.
2
Touch the key for the 1st drawer and then touch [Change Size].
❍ For the bypass tray, touch [Bypass].
The Size Input screen appears.
3
Touch [Custom Size].
The Custom Size
screen appears.
4
Touch [Size
Registration].
The Size Registration
screen appears.
5
Make sure that [X] is
selected.
6
Touch and
❍ Touch [X] until the cursor moves below the digit that you wish to change.
7
Touch [Y].
to select the length of side Y for the paper that is loaded.
to select the length of side X for the paper that is loaded.
3
3-23