Utility Screen - Kyocera KM-C2230 User Manual

10
10.1

Utility Screen

The various functions available in Utility mode are described below.
When the [Utility] key is pressed, the following screen appears.
(Refer to page 10-4.)
G "Reset Mode" function: The default settings, selected after this machine is reset,
can be changed.
G "Mode Store" function: Up to 10 copy programs of user-defined copy settings
can be stored.
(Refer to page 10-8.)
G
The number of the various types of prints can be viewed.
G Various functions can be set according to the user's needs.
G There are two User's Choice screens.
Functions concerning the operation of the machine are available on the User's
Choice: 1 screen, and functions concerning jobs are available on the User's
Choice: 2 screen.
The functions on the User's Choice: 1 screen can be set while a job is being
printed; however, the functions on the User's Choice: 2 screen cannot be set
while a job is being printed.
(Refer to page 10-7.)
G
The copy settings from copy programs stored with the "Mode Store" function
can be recalled.
G The paper source used when printing from the computer in addition to the fonts
can be specified, and reports can be printed.
For details on the printer settings, refer to the KM-C2230 Printer Controller
User's Guide.
10-2
(Refer to page 10-10, page 10-16.)
10.1 Utility Screen