Kyocera KM-C2230 User Manual page 181

7 7.3 Printing Distribution Numbers on Copies ("Set Numbering" Function)
3
Touch [Set
Numbering].
Hint
When the "Set
Numbering"
function is used, the
"Sort" Output
setting is
automatically
selected.
If two or more copies are being printed, the distribution number increases by
1 with each consecutive copy set. However, if only one copy is printed, the
number specified as the first distribution number is repeated.
4
Using the keypad, type
in the first distribution
number to be printed.
❍
The first distribution
number can be set
to any number
between 001 and
999.
5
Select either "First Page Only" or "All Pages".
❍ If "First Page Only" is selected, the distribution number is only printed on the
first page of each copy set.
❍ If "All Pages" is selected, the distribution number is printed on all pages of
each copy set.
6
Select the desired color for the distribution number.
7
Touch [Enter].
❍ If the first distribution number is not set, the distribution numbers start from
001.
❍ After the distribution number reaches 999, it returns to 000.
❍ To cancel the "Set Numbering" function, touch [Cancel] in the Set
Numbering screen.
7-6