When The Machine Is Not Operating Correctly - Kyocera KM-C2230 User Manual

12.2 When the Machine Is Not Operating Correctly

12.2 When the Machine Is Not Operating Correctly
Symptom
Nothing appears in the touch
panel.
The indicator on the [Start] key
does not light up in green.
Even though the [Start] key is
pressed, no copies are made.
The machine cannot be set to
Copy mode.
The machine cannot be turned
on.
Possible Cause
The indicators on the [Start] key
and [Power Save] key light up in
green.
The contrast-adjusting dial for
the touch panel has been set
either too light or too dark.
An access number has not been
entered.
The copy/print job is queued and
waiting to be printed.
The machine is still warming up
after just being turned on.
The machine is malfunctioning.
If the indicator on the [Interrupt]
key is lit, the machine is in
Interrupt mode.
The power supply cord has been
unplugged from the electrical
outlet.
The breaker for the electrical
circuit has been tripped.
Remedy
The machine is in Power Save
mode.
Press any key in the control
panel to cancel Power Save
mode. (See page 2-18.)
While looking at the touch panel,
adjust the contrast dial. (See
page 2-12.)
Enter the access number
according to the procedure
described in "Making Copies
With an Account". (See
page 6-10.)
Touch [Job Log] to check the
jobs that are queued. Wait until
printing begins.
The machine takes 99 seconds
to warm up after it is turned on.
Wait until the machine has
finished warming up.
Follow any messages that
appear on the touch panel.
Specify the copy settings for the
job that copying is interrupted
for. Press the [Interrupt] key to
cancel Interrupt mode. (See
page 6-8.)
Plug the power supply cord into
the electrical outlet.
Close the breaker for the
electrical circuit.
12
12-5