10
Setting the "Center Staple Position" Function
This function is used to make fine adjustments to the center stapling position and
the folding position when binding. (The default setting is 0 mm.)
Before making the adjustment, use the "Booklet" and "Bind" settings to make a copy
sample.
Perform the adjustment while checking the sample that was created.
Reference
For details on the "Booklet" and "Bind" setting, refer to "Selecting Copy Settings"
on page 3-37.
1
Press the [Utility] key.
2
Touch [Admin. Mode].
3
Using the keypad, type in the administrator code.
❍
Touch [Enter].
4
Touch [Expert User Mode].
5
Touch [Center Staple
Position].
10-86
10.10 Specifying Expert User Mode Functions