Gj/218-Type Circuit Breakers - Emerson SAG581126000 System Application Manual

page of 123

/ 123
Contents
Table of Contents
Bookmarks

Table of Contents

SAG581126000

Issue AD, November 23, 2009

GJ/218-Type Circuit Breakers

Restrictions

A bus arrangement must be specified that contains GJ/218-type circuit breaker positions.

Load should not exceed 80% of device rating.

Refer to

Table 5

for required distribution row mounting positions.

Ordering Notes

1) Order circuit breakers as required per

2) Order a jumper kit as required for each circuit breaker per

Number

Mechanical Trip

Ampere

Rating

Positions

100

125

150

175

200

225

250

300

400

600

1, 2

Circuit Breaker Alarm Operation:

Provides an alarm during an electrical or manual trip condition.

Provides an alarm during an electrical trip condition only.

Extended shunt leads are 22 AWG stranded wire, approximately 7-10 ft. long from exit point at bottom of

Distribution Cabinet. Each shunt lead is equipped with a 49.9 ohm current limiting resistor.

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.

Table 5 (GJ/218 Circuit

GJ/218 Circuit Breakers

P/N

Electrical/

Electrical Trip

without

Internal Shunt

256621700

256621300

256621600

256621400

256621800