List Cg: Distribution Bus Module (P/N 514035) (2) Tph Distribution Fuse Positions W/Lvld - Emerson SAG581126000 System Application Manual

SAG581126000
Issue AD, November 23, 2009
List CG: Distribution Bus Module (P/N 514035)
(2) TPH Distribution Fuse Positions w/LVLD
Features
♦ Single Voltage Distribution (+24V)
♦ 500A Maximum Capacity
♦ (2) Distribution Fuse Mounting Positions
(70 to 600A TPH-Type)
♦ Low Voltage Load Disconnect Contactor
Restrictions
Can be installed in any bus position A-D (row 1-4) of a 1-, 2-, 3-, or 4-bus row cabinet.
Does not provide connection for load returns (see Ordering Notes).
Ordering Notes
1) To terminate load returns within the distribution cabinet, order one (1)
2) Order fuses as required per
3) Order load lugs (two hole, 3/8 bolt clearance hole, 1" centers) as required for each distribution position
per Table 10.
3/8-16 CAPTIVE NUT,
6 PLACES (CUSTOMER
MUST PROVIDE LUG BOLTS
AND ADDITIONAL HARDWARE.
BOLT LENGTH: 1-1/4")
LOAD
CONNECTIONS
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Table 4. Order replacement alarm fuses (1/4A) per
2-1/8" 2-1/8"
1"
LOAD
Page 50 of 123
Spec. No. 581126000 (Model 700
List AH for up to two (2) List CG.
3/8-16 CAPTIVE NUT,
6 PLACES (CUSTOMER
MUST PROVIDE LUG BOLTS
AND ADDITIONAL HARDWARE.
BOLT LENGTH: 1-1/4")
2-1/8" 2-1/8"
LOAD
LVD CONTACTOR
System Application Guide
)
NVBA
Home
Table 3.
LOAD
CONNECTIONS