Transition Plates To Mount Relay Rack On Top Of Gnb Absolyte Iip Batteries - Emerson SAG581126000 System Application Manual

System Application Guide
Spec. No. 581126000 (Model 700
Transition Plates to Mount Relay Rack
on Top of GNB Absolyte IIP Batteries
Features
♦ Transition Plate Kits can be ordered to mount relay rack P/Ns 543151, 543152, 543153, 543154, 543155,
543156, and 543157 on top of GNB Absolyte IIP Battery Stands.
♦ Each kit consists of two transition plates with three hole patterns and hardware (3/8") to mount the plates
to the above listed relay racks. Customer must supply hardware to mount the transition plates to the
battery stands.
Restrictions
Used with relay rack P/Ns 543151, 543152, 543153, 543154, 543155, 543156, and 543157only.
Ordering Notes
1) Order P/N 509819 for a Transition Plate Kit to mount relay rack on top of battery with outside dimensions
of...
26.75" x 26.38",
35.75" x 26.38", or
42.50" x 26.38".
2) Order P/N 514880 for a Transition Plate Kit to mount relay rack on top of battery with outside dimensions
of...
29.00" x 26.38",
35.50" x 26.35", or
40.25" x 26.38".
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
)
NVBA
TRANSITION
PLATES
Page 71 of 123
SAG581126000
Issue AD, November 23, 2009
Home