Table of Contents
Advertisement
System Application Guide
Spec. No. 581126000 (Model 700
13) Order as required additional options per Lists 29, 71, and 93.
14) Order as required any additional accessories described under
List 2: Supplemental Bay Common Equipment (Power and Distribution)
(located next to Main Bay)
Features
♦ Provides common equipment for one bussed "power and distribution" bay rated for up to 2000 amperes of
distribution. Includes interbay power busbars and communications cabling.
♦ Mounts to either left or right side of a
♦ Accepts one (1) Distribution Cabinet (options are 3-Row or 4-Row cabinet).
♦ Accepts one (1) Module Mounting Assembly. The Module Mounting Assembly can consist of one (1), two
(2), three (3), or four (4) factory interconnected 8-position Module Mounting Shelves. Each Module
Mounting Shelf in a Module Mounting Assembly provides eight (8) mounting positions for Rectifier
Modules (PCUs).
or
Can be configured for "distribution only" (no Module Mounting Assembly).
Restrictions
Order maximum of one (1) List 2 or
Cannot be used when List 5 is ordered. Order List 2 or List 5, not both.
Supplemental Bays DO NOT accept Converter Modules. DO NOT order List
List 2 Supplemental Bay DOES NOT accept List
(List 21 and 22 are not provided with connection points for interbay busbars.)
Rear access is required for installation of inter-bay busbars.
Ordering Notes
1) Order a relay rack per
Transition Plates per
Batteries' under ACCESSORY DESCRIPTIONS. Relay rack must be same height as relay rack ordered
for
List
1. A ship loose option is available, as described in
DESCRIPTIONS.
2) Order one (1) List
3) Order up to four (4) Distribution Bus Panels as required per
capacity of the Distribution Cabinet ordered.
4) Order one (1) List
Mounting Assembly per PD588705101/PD588705102/PD588705103/PD58805104. List 30 is factory
connected to the Module Mounting Assembly ordered.
or
Order Supplemental Bay 'Distribution Only' option per List 4.
5) Order Rectifier Modules (PCUs) per List
6) Order one (1) Module Mounting Position Blank Cover Panel,
mounting position in the system.
7) Order fuses and/or circuit breakers, as required, per
DESCRIPTIONS.
8) Order input and load distribution lugs, as required, per
DESCRIPTIONS.
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
)
NVBA
List 1
Main Bay.
List 5
per Power System.
'Relay
Racks' under ACCESSORY DESCRIPTIONS. If required, order Relay Rack
'Transition Plates to Mount Relay Rack P/N 543156 on Top of GNB Absolyte IIP
23
or
24
Distribution Cabinet.
30
(interface components for one (1) Module Mounting Assembly). Order a Module
50
Page 17 of 123
ACCESSORY
21
or
22
Distribution Cabinet
'Relay
Racks' under ACCESSORY
'Distribution Bus
as required.
Part No.
'Distribution
Devices' under ACCESSORY
'Wiring
Components' under ACCESSORY
SAG581126000
Issue AD, November 23, 2009
DESCRIPTIONS.
60
or
62
for Supplemental Bays.
Arrangements' and the
540959, for each empty module
Home
Advertisement
Table of Contents
