Zhone IMA CS-200 System Reference Manual page 96

Running Head
Other CPU Settings
VIEWER
This field displays the current password for Viewer SNMP access. All users can see this field.
This password level gives read only access to configuration options and diagnostic features.
SYS CONT
In this field, enter the name of a person to contact for questions about the Integrated Access
System. This field can have up to 23 alphanumeric characters, including spaces. For
convenience, use the system administrator's name in this field.
SYS LOC
In this field, specify the location of the Integrated Access System. This field can have up to 23
alphanumeric characters, including spaces.
SYS PH#
This field allows for the operator to enter the phone number where the unit resides, if
applicable.
ALRM SEQ
The Alarm Sequence setting establishes how the sequence number for alarms is generated. Set
this option to all if you want any alarm generated by the system to be assigned a sequence
number. Or, set this field to report if you want only the alarms set to report to have sequence
numbers.
ACO TYPE
The Alarm Cutoff (ACO) option reports a status to you based on the latch (condition held) or
cur (current condition) setting.
WAN TYPE
This field displays the type of WAN interface, either T1 or E1.
OWAN TYPE
This field displays the type of OWAN interface, either T1 or E1.
4-12
IMACS-200 General Features
Model No.
General Features