Wan Screen Actions; Wan Screen Option Settings And Defaults - Zhone IMA CS-200 System Reference Manual

WAN ports
Table 6-1 summarizes the actions you can perform from this screen, and Table 6-2 lists the
settings controlled on the screen along with their possible and default values.
Action
Save Saves changes to settings.
Undo Returns all settings to the last saved state.
Refresh Updates certain time-related information fields that are not automatically
updated (i.e., performance and test data).
Xcon Displays the connections for the selected WAN port.
Perf Brings up the Performance Data Screen. See the Performance Data section of
this chapter.
Farstat Shows the far-end network register data.
Test Initiates and monitors testing of all WAN port ports. Refer to the Test section
of this chapter.
Main Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or abandon your changes.
Table 5-2. WAN Screen Option Settings and Defaults
Parameter
STATE
FORMAT
LINE CODE
FRAME
TS16
EVEN BIT
LINE LEN
LINE LB
LOCAL LB
LB GEN
LB DET
EER THRHD
COM/NMS RP
Notes: 1 is used to indicate a T1 field only, 2 indicates E1 only
STATE
In the standby state, the WAN port is electrically disconnected from the external network. Set
State setting to stdby (standby) when setting up your WAN links, then changes it to actv
(active) when starting normal operations.If the WAN is in loopback due to a command from
a remote device, the loopback will be dropped if you switch to stdby.
WAN Ports
Table 5-1. WAN Screen Actions
User Options
stdby actv
d4 esf
ami b8zs hdb3
crc d-frm
cas ccs nos
norm inv
110 220 330 440 550 660 0DB 7.5DB 15DB 22.5DB
off on
off on
off llb plb nlb
w/to off on
10e-4 through 10e-9 none
none e-sa4
WAN port User Screens and Settings
Function
Notes Default
stdby
1 esf
b8zs or hdb3
2
2
2
1 110
off
off
1 off
1 w/to
10e-4
2 none
5-3