Delete Cross-Connection Screen - Zhone IMA CS-200 System Reference Manual

Running Head
Cross-Connect Actions
To update a cross-connected circuit from the Cross-Connect Screen, highlight the circuit name
to be updated, and press "p" to invoke the uPdate command. Figure 3-26 shows the WAN port
1-3 and TS (time slots) 6 through 8 being updated. However if the WANs are selected and
deleted as shown in Figure 3-31 then the screen in Figure 3-27 will be blank for WAN TS 6
through 8.
To delete a cross-connected circuit from the Cross-Connect Screen, highlight the circuit name
to be deleted, and press "e" to invoke the dElete command. Figure 3-31 shows the deletion
process.
3-40
Figure 3-31.Delete Cross-Connection Screen
System Configuration and Operation
Model No.
System Operation