Ipr 10B2 And 10Bt Ethernet And Default Ip Option Settings And Defaults - Zhone IMA CS-200 System Reference Manual

Running Head
IPR Configuration Screens and Settings
Table 12-2. IPR 10B2 and 10BT Ethernet and Default IP Option Settings and Defaults
Parameter
ETH IPR STATE
ETH IPR ADDR
ETH IPR MASK
ETH IPR RIP
EHT IPR SH
DEFAULT GATEWAY
ETH IPR STATE
Activates or deactivates Ethernet port. The settings are actv or stdby.
ETH IPR ADDR
IPR's own Ethernet IP address on this IP network.
ETH IPR MASK
The IP netmask value used for this IP network.
ETH IPR RIP
RIP parameters. The default is R&T (Receive & Transmit). Other options are R, T, and none.
ETH IPR SH
Enables or disables split horizon on Ethernet. Options are yes or no.
DEFAULT GATEWAY
IP address of the default gateway.
12-6
User Options
actv stdby
IP Address of Ethernet Port
IP mask of Ethernet Port
none R T R&T
on off
ipaddr
Model No.
IP Routing
Default
stdby
0.0.0.0
255.255.255.255
none
off
0.0.0.0
IPR