Cpu User Screens And Settings; Cpu Main Screen - Zhone IMA CS-200 System Reference Manual

Running Head

CPU User Screens and Settings

4.3 CPU User Screens and Settings
The IMACS-200 main CPU has several user interface screens for port configuration and
network status viewing purposes. These screens are described in the remainder of this chapter.
4.3.1

CPU Main Screen

Figure 4-2 shows the CPU interface Main Screen. You must configure the CPU interface after
logging into the system for the first time. To view this screen, highlight the CPU line in the
Main Screen and press <Enter>.
The CPU has numerous settings that you must configure. The CPU Main Screen displays the
node name, the system location and contact prime, the alarm settings and the host software
version currently installed active. The settings are described in the next few sections of this
chapter.
The bottom highlighted line of the above screen shows a series of actions you can perform in
this menu. To perform an action, press the letter key associated with the uppercase letter of the
desired action. For example, to save your port option settings after making them, press "s" to
invoke the Save command. Table 4-1 lists and describes these actions.
4-2
Figure 4-2.CPU Main Screen
IMACS-200 General Features
Model No.
General Features