Typical Settings For The E1 Owan Ports; Owan Port Setting Options And Defaults For E1 - Zhone IMA CS-200 System Reference Manual

Running Head
Figure 13-5.Typical Settings for the E1 OWAN Ports
Table 13-4. OWAN Port Setting Options and Defaults for E1
Parameter
STATE
Frame
TS16
EVEN BIT
Line LB
Local LB
STATE
The State setting determines whether the port is active or inactive. An inactive port does not
occupy time slots on a WAN link. Set State to standby (stdby) for ports you are not using or
have not yet configured. Set it to active (actv) for ports that are ready for use.
Frame
The frame setting determines the type of framing to be used on the individual port, either crc
or d-frm.
13-8
User Options
stdby actv
crc d-frm
cas ccs nos
norm inv
off on
off on
Model No.
Default
stdby
crc
cas
norm
off
off
OWAN Ports