Ohsu Port Cables; Ohsu Port User Screens And Settings; Ohsu Port Main Screen; Typical Ohsu Port Main Screen - Zhone IMA CS-200 System Reference Manual

Running Head

10.2.2 OHSU port Cables

The OHSU port utilizes 50 um or 62.5 um optical fiber cables with BFOC12.5 (ST)
connectors. A separate transmit and receive fiber is required for each port.

10.3 OHSU port User Screens and Settings

The OHSU ports permit configuration and operation through use of several user screens and
optional settings.

10.3.1 OHSU port Main Screen

You must configure the OHSU port ports for operation. Configuration can be performed from
the OHSU port Main Screen, which is shown in Figure 10-2. To access that screen, highlight
the desired port in the System Main Screen and press <Enter>.
The bottom highlighted line on this screen lists several actions you can perform from the
screen. To perform an operation, simply press the uppercase letter associated with the desired
action. For example, to save your option settings, type "s". Table 10-1 lists the actions you can
perform.
10-2
Figure 10-2.Typical OHSU port Main Screen
Model No.
OHSU Ports