Alarm Output Connector; Serial Port - Craft Interface; Alarm Output Connector Pinouts; Serial Port Interface Connector Pinouts - Zhone IMA CS-200 System Reference Manual

System Installation
Table 2-8. Sub Rate Data (SRU) ports connector pinouts
RJ-45(F) Pin
6
7
8
2.4.6

Alarm Output Connector

The IMACS-200 is equipped with an RJ45 connection on the rear faceplate labelled ALARM to drive
external alarm responders such as buzzers, bells, and lights. Table 2-9 indicates the pin-outs for this
RJ45 connector.the T1 RJ45 connector pinouts.
Table 2-9. Alarm Output Connector pinouts
RJ-45(F) Pin
1
2
3
4
5
6
7
8
2.4.7

Serial port - Craft Interface

The IMACS-200 is equipped with an RJ45 connection on the front faceplate labelled SERIAL to allow
crafts person access to the IMACS-200 at all times.
Table 2-10. Serial port interface connector pinouts
RJ-45(F) Pin
4
5
6
1,2,3,7,8
System Installation
Signal
TXD
CTS
RTS
Signal
Alarm Output 1C
Alarm Output 1
Alarm Output 2C
Alarm Output 2
Alarm Output 3C
Alarm Output 3
Alarm Output 4C
Alarm Output 4
Signal
Ground
Receive
Transmit
Not used
Connector Pin-outs
Direction
Input
Output
Input
2-11