Zhone IMA CS-200 System Reference Manual page 179

SRU Ports
Action
Save
Undo
Refresh
Copy
Test
Main
Table 8-2 lists the SRU port Main Screen parameters and available option settings.
Table 8-2. Main Screen Option Settings and Defaults
Parameter
STATE stdby
WAN/SRV none
owan-3 owan-4
TS 01-24 or 01-31
FRAME a
RATE .3
SR TS n/a
INTF asyn
8
COM CF 1
none
CTS perm
TX CLK n/a
LB off
LB GEN n/a
Notes:
1. The only options available for the SRU ports are: a and b-5.All five ports will use the
same Frame Format.
2. Speeds of 0.3, 1.2, and 14.4 are not supported for synchronous channels.
3. Communication Configuration is a three step process. This field will show n/a when
sync is chosen as the INTF option.
Sub Rate Data Ports
Table 8-1. Main Screen Actions
Saves changes to settings.
Returns all settings to the last saved state.
Updates certain time-related information fields that are not automatically
updated (i.e., test status).
Copies the contents of the current column to the next column. Useful if you
change a lot of entries in one column and want to repeat those changes in
subsequent columns.
Initiates and monitors testing of all SRU port ports. Refer to the Test section
of this chapter.
Returns to the System Main Screen. If changes are made to settings and not
saved, you will be prompted to save or lose changes.
User Options
act
wan-1 wan-2 wan-3 wan-4 owan-1 owan-2
b-5
1.2 2.4 4.8 9.6
1 1-5
sync
7 6 5
2
odd even space
l0 l30 l60 l100
int ext
dte net
off ocu csu dsu
SRU port User Screens and Settings
Function
14.4 19.2 28.8 38.4
mark
rl0 rl3 rl6 rl10
Notes Default
stdby
wan-1
01
1 a
2 .3
1
asyn
8
3 1
none
off perm
n/a
off
off
8-3