Port Settings For Owan; Typical Settings For The T1 Owan Ports; Owan Port Setting Options And Defaults For T1 - Zhone IMA CS-200 System Reference Manual

Running Head
SIG STATUS
This field reflects that status of the optical link. Possible values indicate loss of signal (los),
normal (norm)
SIGTYPE
This read-only field indicates the type of signaling employed on the optical link. possible
values are ds2 and e2.

13.4.1 Port Settings for OWAN

Figure 13-4 shows the screen displaying the four DS1 or E1 ports and their respective settings.
Figure 13-4.Typical Settings for the T1 OWAN Ports
Table 13-3. OWAN Port Setting Options and Defaults for T1
Parameter
STATE
Format
Line LB
Local LB
LB GEN
LB DET
13-6
User Options
stdby actv
d4 esf
off on
off on
off llb plb
off on w/to
Model No.
Default
stdby
esf
off
off
off
off
OWAN Ports