Nvram Backup Screen; Nvram Restore Screen - Zhone IMA CS-200 System Reference Manual

System Configuration and Operation
When NVRAM is restored via TFTP or from FLASH, the entire image is transferred including
the circuit name table. The circuit name table shown as Xcon Names has been added to the
selections to allow ascii restore as shown in the figure below.
Upon restoring the Xcon Names table, changed circuit names will be restored into NVRAM
for recognition whenever the resource using it is next changed.
To change a circuit name permanently using NBR, change the circuit name in both the Xcon
Names and the Xcon Names selections. Changing the names in the Xcon table alone will only
preserve the name until next time the resource holding it is changed.
System Operation
Figure 3-21.NVRAM Backup Screen
Figure 3-22.NVRAM Restore Screen
Circuit Names
3-31