Usb Control Settings; Network Settings - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

A P P E N D I X A
Remotely managing your system through a network interface

USB Control settings

This menu allows you to associate a video source with a USB receptacle on the ECP.
Submenu setting
USB1 Source
USB2 Source

Network settings

This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP is not used.
Submenu setting
DHCP
IP Address
Subnet Mask
Gateway
DNS
Group Name
Projector Name
Location
Contact
SNMP
66
Description
Enables touch for the selected video source (VGA-1, VGA-2, HDMI
or Disabled) by associating the video source with the room computer
USB receptacle (USB1) on the ECP.
Enables touch for the selected video source (VGA-1, VGA-2, HDMI
or Disabled) by associating the video source with the laptop USB
receptacle (USB2) on the ECP.
Description
Determines if the projector's IP address and other network settings
are dynamically assigned by a DHCP server or manually set.
On allows the network's DHCP server to assign a dynamic IP
l
address to the projector.
Off allows you to manually set the projector's IP address and
l
other network settings.
Displays or allows you to set the projector's IP address in values
between 0.0.0.0 and 255.255.255.255.
Displays or allows you to set the projector's subnet mask number in
values between 0.0.0.0 and 255.255.255.255.
Displays or allows you to set the projector's default network gateway
in values between 0.0.0.0 and 255.255.255.255.
Displays or allows you to set the projector's IP address for your
network's primary domain name server in values between 0.0.0.0 and
255.255.255.255.
Displays or allows you to set the projector's workgroup name
(maximum 12 characters).
Displays or allows you to set the projector's name (maximum 12
characters).
Displays or allows you to set the projector's location (maximum 16
characters).
Displays or allows you to set the contact name or number for projector
support (maximum 16 characters).
Turns the Simple Network Management Protocol (SNMP) agent on or
off.