Focusing The Image - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

C H A P T E R 3
Using your interactive whiteboard system
Setting
MPU Version
Network Version
Model Number
Serial Number

Focusing the image

Use the focus lever located on the projector lens to focus the projected image.
g
To focus the image
Move the focus lever up or down until the image is in focus.
21
Use
Displays the projector microprocessor
unit (MPU) firmware version in x.x.x.x
format.
Displays the projector's network
communications processor firmware
version in x.x.x.x format.
Displays the projector's model number.
Displays the projector's serial number.
Notes
If you haven't enabled the Network
and VGA Out setting, this setting is
unable to display the projector's
network communications processor
firmware version and displays 0.0.0.0
instead.