Chapter 2: Installing Your Interactive Whiteboard System; Choosing A Location - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

Chapter 2
Installing your interactive
whiteboard system

Choosing a location

Choosing a height
Securing your interactive whiteboard system
Locking the pen tray to your interactive whiteboard
Securing the projector to the boom
Routing the cables
Installing SMART software
Consult the SMART Board 800i5 interactive whiteboard system installation document included with
your product for instructions on how to install your product.
I
I M P O R T A N T
Use the SMART Board 880i5 and 885i5 interactive whiteboard system installation guide
(smarttech.com/kb/154546) or SMART Board 880i5-SMP or 885i5-SMP interactive whiteboard
system installation guide (smarttech.com/kb/170130) to install your interactive whiteboard,
projector and ECP.
This chapter provides additional considerations and details for installing your interactive whiteboard
system.
Choosing a location
Choose a location for your interactive whiteboard system that's far from bright light sources, such as
windows and strong overhead lighting. Bright light sources can cause distracting shadows on your
interactive whiteboard and can reduce the contrast of the projected image.
Select a wall with a flat, regular surface and sufficient clearance to accommodate your interactive
whiteboard system. Install the projector and your interactive whiteboard on the same flat surface. For
7
7
8
9
9
9
9
10