Using The Rca Connector Pod - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

C H A P T E R 3
Using your interactive whiteboard system
N
N O T E
Use an SBX8 series control cable (Part No. SB8-CTRL) to convert the 4-pin connector to a DB9
RS-232 connector for use with a third-party room control system. An SBX8 series control cable is
included with SMART Board 800i5-SMP interactive whiteboard systems. Alternatively, you can
purchase an SBX8 series control cable from your local SMART reseller.
T
T I P
If your computer has an HDMI output, you can connect a USB cable from your computer to either of
the USB B receptacles on the ECP and an HDMI cable from your computer to the HDMI connector
on the projector. Associate the HDMI source with the appropriate USB receptacle (see Adjusting
projector settings on page 14). Press the Input button on the ECP to switch to the HDMI input.

Using the RCA connector pod

The RCA connector pod is an optional accessory for the SMART Board 800i5 interactive whiteboard
system. Purchase this item from your authorized SMART reseller.
The following diagram and table describe the components of the RCA connector pod.
Number Function
1 RCA composite video input jack (for peripheral devices such as a DVD/Blu-ray
player)
2 RCA audio jack (right input)
3 RCA audio jack (left input)
26