Retrieving Your Password; Resetting The Projector - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

C H A P T E R 6
Troubleshooting your interactive whiteboard system

Retrieving your password

If you forget the projector's password, you can retrieve it by accessing the projector service menu
directly from the projector or from the password settings menu on your projector's web page (see
Password settings on page 68).
g
To retrieve your password from the service menu
1. Using the remote control, press the following buttons quickly to access the service menu:
Down, Up, Up, Left, Up.
2. Scroll to Password Get, and then press Enter on the remote control.
The password appears on the screen.
3. Write down the password.
4. Scroll to Exit, and then press Enter on the remote control to exit the projector service menu.

Resetting the projector

At some point during troubleshooting, you might need to reset all projector settings.
I
I M P O R T A N T
This action is irreversible.
g
To reset all projector settings
1. Using the remote control, press the following buttons quickly to access the service menu:
Down, Up, Up, Left, Up.
2. Scroll to Factory Reset, and then press Enter on the remote control.
3. Scroll to Exit, and then press Enter on the remote control to exit the projector service menu.
58