Simple Network Management Protocol (Snmp) - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

A P P E N D I X A
Remotely managing your system through a network interface
N
N O T E S
The first time you enable the password settings, the default password value is four numbers,
l
for example, 1234.
The maximum allowable password length is four numbers or letters.
l
If you forget the projector password, refer to Accessing the service menu on page 57 to set
l
the projector setting to factory defaults.

Simple Network Management Protocol (SNMP)

Your projector support a list of SNMP commands as described in the management information base
(MIB) file. You can download this file by browsing to
files link in the Hardware section for the SMART UF75 projector.
The SNMP agent in your projector supports SNMP version 1 or 2. Upload the MIB file to your SNMP
management system application, and then use it as described in your application's user guide.
69
smarttech.com/software and clicking the MIB