Installing And Securing Your Smart Board Interactive Whiteboard; Environmental Requirements - Smart Technologies SMART Board X800 Series User Manual

Chapter 2
Installing and securing your
SMART Board interactive
whiteboard
In this chapter
Refer to these topics for information about mounting your SMART Board X800 series
interactive whiteboard on a floor stand or on a wall.
Environmental requirements.................................................................. page 7
Installing your SMART Board interactive whiteboard ............................ page 8
Securing the pen tray and interactive whiteboard................................ page 10

Environmental requirements

Before installing your interactive whiteboard, review the following environmental
requirements.
Environmental
requirement
Operating temperature 41°F to 95°F (5°C to 35°C)
Storage temperature
Humidity
Water and fluid
resistance
Parameter
-40°F to 120°F (-40°C to 50°C)
5% to 80% relative humidity, non-condensing
• Intended for indoor use only. Doesn't meet any
salt-spray or water ingress requirements.
• Don't pour or spray liquids directly onto the interactive
whiteboard or any of its sub-components. These liquids
might get into areas where they could damage sensitive
electronic components. Refer to page 30 for detailed
instructions on cleaning your interactive whiteboard.