Waste Ink Counter; Replacing The Waste Ink Bottle - Epson SC-F9400H Series Operator's Manual

SC-F9400H Series/SC-F9400 Series Operator's Guide
Replace waste ink bottle and press
Replace the Waste Ink Bottle with a new bottle
immediately.
Replacement procedure U
Bottle" on page 48

Waste Ink Counter

The printer uses the waste ink counter to track waste ink
and displays a message when the counter reaches the
warning level. If you follow the message instructions
(Replace waste ink bottle and press
the Waste Ink Bottle with a new one, the counter is
cleared automatically.
If you need to replace the waste ink bottle before the
message is displayed, select Replace Ink Bottle from the
setup menu.
U User's Guide (Online Manual)
c
Important:
If you replace the Waste Ink Bottle before being
prompted by a message, always clear the waste ink
counter. Otherwise, the replacement interval for the
Waste Ink Bottle will no longer be notified correctly
from the next message.

Replacing the Waste Ink Bottle

Follow the procedure below to replace the parts.
Before starting this procedure, be sure to read the
following:
"Precautions regarding maintenance" on page 31
U
Maintenance
. is displayed
"Replacing the Waste Ink
.) and replace
A
Remove the Waste Ink Bottle from the Waste Ink
Bottle holder.
If the backside of the stopper is stained, wipe it.
B
Insert the waste ink tube into the mouth of the
new Waste Ink Bottle and place the Waste Ink
Bottle in the holder.
Tightly seal the lid on the used Waste Ink Bottle.
c
Important:
❏ Be sure to confirm that the waste ink tube
is inserted in the mouth of the waste ink
bottle. Ink will spill onto the surrounding
area if the tube is not inserted in the bottle.
❏ You will need the lid for the Waste Ink
Bottle when disposing of waste ink. Keep
the lid in a safe place; do not throw it out.
48