Oil Circulation - Duerkopp Adler 511 Service Instructions Manual

7.1

Oil circulation

1
2
4
3
3
5
From the filler pipe 1, the oil flows into the oil reservoir 2 and then it
runs over into the oil reservoir 3.
All lubricating points in the arm and head zone are provided with oil
from the oil reservoir 2. The oil reservoir 3 supplies all lubricating
points of the base plate.
The oil squirting off from the crankshaft drive comes into the oil pan via
oil wick 4.
The oil which is not needed by the hook flows back to the oil pan via
the return pipe 5.
The squirted oil contained in the oil pan is sucked up and delivered
back to the oil reservoir 2 by means of a lubricating oil pump.
Caution – Risk of injury !
Turn the main switch off.
Carry out assembly work on the oil circulation system only when the
automatic bartacker is switched off
CAUTION !
When carrying out assembly work, please observe that the hose ends
and wicks are re-adjusted to their correct connections.
37