Reference Position - Duerkopp Adler 511 Service Instructions Manual

6.2

Reference position

4 3
32
2 1
Caution – Risk of injury !
Turn the main switch off.
Check and adjust the reference position with utmost caution when the
automatic bartacker is switched on.
Rule and control
The movement of the clamping arm 2 and the rest plate 4 is influenced
by two step motors.
The feed plate 5 carries the clamping arm and the rest plate.
–
Press function key "F" when the main menu is displayed.
–
Enter code number "25483".
The display changes over to the technician mode.
–
Activate the menu "Machine/Parameter" with the key "OK".
–
Select parameter "Loading position".
–
Select function "B = Machine zero position".
–
Press the "OK" key.
The automatic bartacker moves to the machine zero position.
–
Turn the main switch off.
–
Unscrew screws 1 and 3.
–
Take off clamping arm 2 and rest plate 4.
Cut.rpm: 250
Max.rpm: 2700
Stop pos.:
Sew.st.pt.:
Ref.freq.:
Cl.thr.cl.:160
Op.thr.cl.:300
Op.thr.tn.:300
5
0
A
1