Lag Screw Installation; Canopy Installation - Casablanca SIENA Owner's Manual

Hide thumbs

Table of Contents

NOTE: This step is required only under two conditions:

If the fan weighs 36 lbs. or more or if the existing ceiling

fixture outlet box needs to be modified for a ceiling fan

application (for example, if the house is not new

construction and you are replacing an existing light fixture).

We recommend that the ceiling box be of sufficient

capacity to support the weight of the fan and light fixture

under any conditions. If in doubt whether you need to

install the lag screw, consult a qualified electrician.

Step 2. With the large washer attached, pass the lag screw

(Pack A) through the center hole of the crossbar mounting

bracket and screw into the guidehole. Tighten until the

outlet box is mounted firmly to the beam. This box must

be secured to the ceiling firmly.

CANOPY HARDWARE (not to scale)

Step 3. Attach the canopy to the crossbar mounting bracket

with three of the 8-32 x 2

Pack B) and lock washers provided with your Casablanca

fan. Tighten using the provided screwdriver until snug

against the ceiling.

NOTE: On sloped ceilings, align the canopy opening

with the top or peak of the room.