Upper Glass Assembly; Hanging The Fan - Casablanca Veneto Owner's Manual

Upper Glass
Step 1. Slide the Glass over the upper part of the
Fan Assembly.
Step 2. The Glass should rest inside the rim of the
lower part of the motor on top of the foam strips to
avoid contact with rim.
Step 3. Remove each of the 6 Upper Bulbs from
their packs and Screw into the Bulb Sockets around
the top part of the fan.
Note: When replacing bulbs, only replace with max
15 watt bulbs.
Step 1. Trim wires to about 6" from the top of the
downrod.
Step 2. Strip 1/2" of insulation off each wire using
wire strippers. Raise the fan and place the ball into
the hanger bracket.
Step 3. Align the notch on the ball with the indent
in the hanger bracket. (Rotate the fan until you hear
the notch pop into place.)
WARNING: Fan may fall if
not assembled as directed
in these installation
instructions.
10
UPPer gLass Hardware

UPPer gLass asseMBLY

HangIng tHe fan

Indention
Upper Bulb (6)
Rim
Notch