Light Kit Installation - Casablanca Veneto Owner's Manual

Lower Glass
Step 1. To attach the Light KIt Mounting Plate
partially install two light kit screws into the switch
housing mounting plate.
Step 2. Connect the molex plug on the Light Kit to
the Fan.
Step 3. Align the keyhole slots in the Light Kit with
the light kit screws.
Step 4. Turn the Light Kit counterclockwise until the
light kit screws are firmly situated in the narrow end
of the keyhole slots.
WARNING: Do not let wires
become lodged between Fan
Adapter and Light Kit.
Step 5. Install the remaining screw into the Light
Kit.
Step 6. Tighten all three screws firmly.
LIgHt kIt Hardware
Light Kit Glass Cover

LIgHt kIt InstaLLatIon

V
™
eneto
Finial
Light Kit Screws
Light Kit Screw (3)
Lower Bulb (3)
Molex Plug
15