Table of Contents
Advertisement
INSTALLING ON A FAN WITH PULL CHAIN REVERSING
Chain Guide
Step 1. Select location to install chain guide
aligning reverse pull chain and chain guide.
Step 2. Remove #8 pan head screw.
Step 3. Install chain guide with #8 pan head screw
removed from step 2.
INSTALLING FAN ADAPTOR
Adaptor
Adaptor Screws
Step 1. Install adaptor to bottom of fan by
aligning pegs on the adaptor with the holes on the
bottom of the fan switch housing.
Step 2. Attach adaptor by installing two adaptor
screws.
Step 3. Securely tighten.
WIRING AND INSTALLING LIGHT KIT/ SPEAKER
Cap Assembly
Wire
Screws
Connectors
Step 1. Connect the black wire from the light kit/
speaker and the blue wire from the canopy.
Step 2. Connect the white wire from the light kit/
speaker and the white wire from the canopy.
Step 3. Secure all wire connections using wire
connectors.
CAUTION: Be sure no bare metal wires or wire
strands are visible after making the connections.
10
#8
Pan Head
#8
Screw
Pan Head
Screw
Chain Guide
Step 2
Step 3
Peg
Steps 1-3
Adaptor Screw
Steps 1-3
C
onCert
Steps 4-6
COMPLETING INSTALLATION OF LIGHT KIT
INSTALLING LIGHT BULBS AND GLASS
Step 1. Remove the protective ring foam.
Step 2.
Remove the three lower bulbs from their
packaging, and install into the light kit.
Note: When replacing bulbs, only replace with max
40 watt bulbs.
Step 3. Place glass bowl over the light kit/speaker
assembly, ensuring the threaded portion of the light
kit/speaker assembly comes out of the bottom of the
glass.
Step 4. Place the finial over the threaded portion
of the light kit/speaker assembly and twist it as
clockwise until tight against the glass bowl.
B
reeze
Step 4. Lift the light kit/speaker to the adaptor on
the bottom of the fan switch housing.
Step 5. Align the side screw holes in the adaptor
and the cap.
Step 6. Attach the light kit/speaker with three cap
assembly screws.
Steps 1-2
Steps3-4
11
Advertisement
Table of Contents
