Printing On Envelopes; Printing On Labels - Xerox WorkCentre 7775 User Manual

Printing on Envelopes

Envelopes can be printed only from Tray 5 (Bypass Tray).
Guidelines
• Successful envelope printing is dependent on the quality and construction of the envelopes. Try
another envelope brand if the desired results are not achieved.
• Maintain constant temperatures and relative humidity.
• Store unused envelopes in their packaging to avoid the excess moisture and dryness which can
affect print quality and cause wrinkling. Excessive moisture can cause the envelopes to seal before
or during printing.
• Avoid padded envelopes; use envelopes that lie flat on a surface.
• In the printer driver, select either Envelope as the paper type or Tray 5 (Bypass Tray) as the
paper source.
Note: Some wrinkling or embossing may occur when printing on envelopes.
Caution:
Never use envelopes with windows or metal clasps; they can damage the printer. Damage
caused by using unsupported envelopes is not covered under the Xerox warranty, service
agreement, or Total Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the
United States and Canada. Coverage may vary outside these areas, please contact your local
representative for details.

Printing on Labels

Labels can be printed from Tray 1, 2, 3, 4, and 5 (Bypass Tray).
To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox
Supplies website at www.xerox.com/office/WC7755_WC7765_WC7775supplies.
WorkCentre 7755/7765/7775 Multifunction Printer
Printing
55
User Guide