Printing Booklets; Selecting Booklet Printing In A Supported Driver Using A Booklet Maker - Xerox WorkCentre 7775 User Manual

Printing Booklets

With 2-sided printing, you can print a document in the form of a small book. Create booklets for any
paper size that is supported for 2-sided printing. The driver automatically reduces each page image
and prints four pages per sheet of paper (two on each side). The pages are printed in the correct order
so that you can fold and staple the pages to create a booklet.
Notes:
• Automatic folding requires the optional Professional Finisher or the optional Light
Production Finisher.
• Booklets can be created using 8.5 x 11 in. (A4 210 mm x 297 mm) paper and 11 x 17 in. (A3 297
mm x 420 mm) paper.
When you print booklets, you can specify the creep and gutter in supported drivers.
• Gutter: Specifies the horizontal distance (in points) between the page images. A point is 0.35 mm
(1/72 in.).
Creep: Specifies how much the page images are shifted outward (in 10ths of a point). This
•
compensates for the thickness of the folded paper, which otherwise would cause the page images
to shift slightly outward when folded. You can select a value from zero to 1.0 points.
Gutter

Selecting Booklet Printing in a Supported Driver Using a Booklet Maker

Windows
1. In the printer driver, click the Paper/Output tab, click the arrow to the right of Finishing, then
select Booklet Creation.
2. In the Booklet Creation window, under Booklet Finishing, do one of the following:
• Click None: no folding or stapling.
• Click Booklet Fold: bi-fold, 5 sheets maximum.
Click Booklet Fold and Staple: bi-fold and saddle staple, 15 sheets maximum.
•
Creep
WorkCentre 7755/7765/7775 Multifunction Printer
Printing
67
User Guide