Xerox WorkCentre 7775 User Manual page 103

7. To include only a front cover or only a back cover:
a. Touch Front Cover Only or Back Cover Only.
b. Touch a printing option for the covers: Blank Cover, Print on Side 1, Print on Side 2, or Print on
Both Sides.
c. If you selected Print on Both Sides, the image on Side 2 can be rotated 180 degrees by
touching Rotate Side 2.
d. Touch the tray containing the cover paper under Paper Supply.
8. Touch Save. The cover settings are displayed in the Special Pages window.
Note: To edit or delete a cover, touch the cover in the list, then touch the desired operation in the
drop-down menu.
9. Touch Save on the Special Pages window.
Chapter Start Pagination
To set each chapter to start on the front or back of a page, when you copy 2-sided, define the chapter's
starting page number. If necessary, one side of the paper is left blank so that the chapter starts on the
requested side of the paper.
To set the start side of particular pages:
1. Touch Copy on the touch screen.
2. Under Paper Supply, touch the tray containing the paper for the body pages of the job.
Note: If the paper supply is set to Auto Select, Chapter Start is disabled.
3. Touch the Output Format tab.
4. Touch Special Pages, then touch Chapter Starts.
5. Touch the Page Number box, then use the alphanumeric keypad to enter the page number.
6. Touch either On Right Page, the front side of the paper, or On Left Page.
7. Touch Add. That page is added to the list on the right of the window.
8. Repeat steps 5 to 7 for other pages to be set.
9. Touch Close. The page settings are displayed in the list on the right side of the Special Pages window.
10. Touch Save.
Adding Inserts
Blank or pre-printed sheets can be inserted at specific locations in your copy job. The tray to be used for
the inserts can be specified.
Note: The paper used for the inserts must have the same width as the paper used for the rest of the
document. Inserts cannot be added if Booklet Creation is selected.
To add inserts:
1. Touch Copy on the touch screen, then touch the Output Format tab.
Note: If the paper supply is set to Auto Select, inserts cannot be added.
2. Touch Special Pages, then touch Inserts.
WorkCentre 7755/7765/7775 Multifunction Printer
Copying
103
User Guide