Midi 03 - Midi In Track Arming; Midi 04 - Midi Id - Steinberg Nuendo SyncStation Operation Manual

MIDI full position setting in Nuendo
MTC, Full Position and MIDI Device ID can all be set
within Nuendo from the SyncStation MIDI section in the
SyncStation Settings pop-up window.
The MIDI settings in the SyncStation Settings pop-up window

MIDI 03 - MIDI In Track Arming

MIDI 03-MIDI In Track Arming
>Nuendo >RS422-Out
This setting is independent of the RS422 In record and
track arming, but performs the same function for MMC
commands from the MIDI input.
>Nuendo
Routes all record and track arming commands to Nuendo
via USB.
>RS422-Out
Routes all record and track arming commands to the
RS422 output.
MMC record and track arming in Nuendo
The MIDI track arming can be set from the "Track Record
Arming Routing" section within the SyncStation Settings
pop-up window.
Changing the routing for MIDI track record arming

MIDI 04 - MIDI ID

MIDI 04-MIDI ID
>0 >1 >2 >3 >4 >5 >6 >7 >8 >All(7f)
This determines the MIDI device ID used by the com-
mands sent out via the MIDI Out.
Changing the MIDI device ID in Nuendo
You can change the MIDI device ID by selecting a value
from the Device ID pop-up menu in the SyncStation Set-
tings pop-up window.
Changing the MIDI device ID.
34
Menu Reference