Printing A Grayscale Sample (Windows 2000/Xp/Server 2003 Only) - Canon LASER SHOT LBP3500 User Manual

Printing a Grayscale Sample (Windows 2000/XP/Server
2003 only)
You can print an adjusted grayscale sample after specifying the settings in the
[Grayscale Adjustment] sheet. [Preview] is printed in the center of the paper, and
this is surrounded by images where [Brightness] and [Contrast] are changed by 1
unit in each of the corresponding directions. This is useful to adjust the grayscale of
the printed paper.
1
If you are using Windows 2000/XP/Server 2003, display the
[Device Settings] sheet, and then make sure that [Spooling at
Host] is set to [Auto].
2
Display the [Quality] sheet, select the [Manual Grayscale
Settings] check box, and then select the [Print Grayscale
Sample] check box.
3
Confirm the settings, then click [OK].
IMPORTANT
When printing a grayscale sample, be sure to set [Page Layout] in the [Page Setup]
sheet to [1 Page per Sheet].
Using the Various Printing Functions
4
4-67