Using A Lan Cable - Canon LASER SHOT LBP3500 User Manual

Using a LAN Cable

If the optional network board (NB-C1) is installed, the printer can be connected to
the network using a Category 5 twisted pair cable. Have cables or a hub ready as
needed.
NOTE
1
For details on the procedure for installing the network board, see "Network Board," on p.
•
6-31.
If this printer is connected to a network, network settings will need to be configured, the
•
printer will need to be installed as a network printer, the print server will need to be
configured. For details on these settings, see the instruction manual supplied with the
network operating system or "Network Guide".
■ Network Environment
The optional network board supports 10BASE-T/100BASE-TX connections.
When connecting to a 10BASE-T Ethernet network
•
When connecting to a 100BASE-TX Ethernet network
•
1-16 Connecting to a Computer
Computer without
10BASE-T Connector
10BASE-T
Network Board
LAN Connector
10BASE-T Hub
Computer without
100BASE-TX Connector
100BASE-TX
Network Board
LAN Connector
100BASE-TX Hub
Computer with
10BASE-T Connector
10BASE-T Cable
Computer with
100BASE-TX Connector
100BASE-TX Cable