Setting
[Continue
Printing with the
Multi-purpose
Tray]
[Feed Custom
Paper
Horizontally
from the
Multi-purpose
Tray]
1
*
This option can be specified only when the optional duplex unit is installed, and [Print Style] is set to
[Booklet Printing] in the [Finishing] sheet.
2
*
This option can be specified only when the optional paper feeder is installed.
3
Confirm the settings, then click [OK].
Precautions for Handling the Multi-purpose Tray or Paper
Cassette
Be careful of the following points when handling the multi-purpose tray or paper
cassette.
IMPORTANT
Do not pull out the paper cassette while the printer is printing. This may result in paper
•
jams or damage to the printer.
Do not touch the paper in the multi-purpose tray or pull it out during printing. This may
•
result in a faulty operation.
Refill the paper cassette after all the loaded paper runs out. If the cassette is refilled
•
when paper still remains in the cassette, it may result in misfeeds.
Do not put anything other than the printing paper on the multi-purpose tray. Also, do not
•
press on top of or apply excessive force to the multi-purposes tray. This may result in
damage to the multi-purpose tray.
Setting Value
Specify whether the printer should
switch the paper source to the
multi-purpose tray automatically when
-
a cassette has run out of paper during
a job and the paper specified in [Output
Size] in the [Page Setup] sheet is not
loaded in any other cassette.
When feeding custom size paper of the
following sizes in landscape orientation
from the multi-purpose tray, select the
-
check box for this option.
- Width 148.0 - 297.0 mm
- Length 210.0 - 297.0 mm
Description
Paper Source
2-15
2