Printing a Color Sample (Windows 2000/XP/Server 2003
You can print an adjusted color sample after specifying the settings in the [Color
Adjustment] sheet. [Preview] is printed in the center of the paper, and this is
surrounded by images where the color tone is changed by 1 unit in each of the
corresponding directions. This is useful to adjust the colors on the printed paper.
Using the Various Printing Functions
Downloaded from ManualsPrinter.com Manuals
If you are using Windows 2000/XP/Server 2003, display the
[Device Settings] sheet, and then make sure that [Spooling at
Host] is set to [Auto].
Display the [Quality] sheet, select the [Manual Color Settings]
check box, and then select the [Print Color Sample] check
When printing a sample after adjusting the brightness or contrast, set [Color
Mode] to [Black and White].
Conﬁrm the settings, then click [OK].
When printing a color sample, be sure to set [Page Layout] in the [Page Setup]
sheet to [1 Page per Sheet].