Configuring Windows Firewall To Unblock Communication With The Client Computers - Canon LASER SHOT LBP3500 User Manual

Configuring Windows Firewall to Unblock Communication
with the Client Computers
1
Insert the supplied "LBP3500 User Software" CD-ROM into
the CD-ROM drive.
If CD-ROM Setup appears, click [Exit].
2
From the [Start] menu, select [My Computer], right-click the
CD-ROM icon, and then select [Open] from the pop-up menu.
3
Double-click [English] ➞ [WF_UTIL] ➞ [CNAB6FW.EXE].
[CAPT Windows Firewall Utility] runs.
IMPORTANT
You can also run the utility by selecting [Run] from the [Start] menu, entering
"D:\English\WF_UTIL\CNAB6FW.EXE", and then clicking [OK]. (The CD-ROM
drive name is indicated as "D:" in this manual. The CD-ROM drive name may differ
depending on the computer you are using.)
4
Click [Unblock].
NOTE
You cannot click [Unblock] if the firewall is already configured to unblock
communication with client computers.
Windows Firewall 8-13
8