Canon LASER SHOT LBP3500 User Manual page 375

3
4
6
5
6-44 Network Board
Remove the two screws and remove the network board.
IMPORTANT
Do not touch the network board parts, printed wire, or connectors with your hands.
Switch the DIP switch 1 to ON.
Set the DIP switches with the tip of a ball-point pen etc.
E R R
C 1
N B -
IMPORTANT
When setting the DIP switches, be careful not to damage the main board with the
tip of a ball-point pen etc. Do not use a sharp object such as a mechanical pencil.
Insert the network board into the expansion slot.
Hold the metal panel portions of the network board and insert the board while
aligning it with the guide rails inside the expansion slot.
IMPORTANT
Do not touch the network board parts, printed wire, or connectors with your hands.
•
Insert the printer connector of the network board securely into the connector inside
•
the expansion slot.
DIP switch 1
ON
1 0 0
L N K
1
2 3 4
OFF