Canon LASER SHOT LBP3500 User Manual page 367

5
6
6
6-36 Network Board
Secure the top and bottom portions of the network board with
the two screws supplied with the network board.
Attach the ferrite core to the LAN cable as shown in the figure.
Attach the ferrite core at 5 cm or less from the end of the connector which is
connected to the printer.
NOTE
This network board does not come with a LAN cable. A Category 5 twisted pair
cable is required for installing the network board and connecting the printer to a
network. Have cables or a hub ready as needed.
5 cm or less