Canon LASER SHOT LBP3500 User Manual page 411

A portion of a page is not printed.
Cause 1
Remedy 1 Clear the [Manual Scaling] check box in the printer driver. If the check box is
Remedy 2 Select the [Manual Scaling] check box in the printer driver, then specify an
Cause 2
Remedy
Cause 3
Remedy 1 The printable area for this printer is the area except for within a 5 mm margin
7
Remedy 2 Select the [Print with Upper Left of Sheet as Starting Point] check box in the
The printing position is skewed.
Cause 1
Remedy
Cause 2
Remedy
7-32 Print Quality Problems
The scale factor is incorrect.
cleared, the scaling factor will be set according to [Page Size] and [Output Size]
automatically.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
appropriate scale factor according to the paper size to be used.
In order to specify the setting for [Manual Scaling], display the [Page Setup]
sheet.
The position of the paper is incorrect.
Load the paper properly. (See "Loading Paper in a Paper Cassette," on p. 2-26,
"Loading Paper in the Multi-purpose Tray," on p. 2-45)
A document with no margins was printed.
(15 mm for envelopes) on all sides of the paper. Create a margin around the
print data.
printer driver, then print the document. However, data may be printed with the
edges missing.
In order to specify the setting for [Print with Upper Left of Sheet as Starting
Point], display the [Finishing Details] dialog box by clicking [Finishing Details] in
the [Finishing] sheet.
[Gutter] is specified.
Specify [Gutter] in the printer driver to [0].
In order to specify the setting for [Gutter], display the [Gutter Settings] dialog
box by clicking [Gutter] in the [Finishing] sheet.
"Top Margin" and "Paper Position" in the application are not specified properly.
Specify the settings for "Top Margin" and "Paper Position" in the application
properly. (See the instruction manual supplied with the application)