Canon LASER SHOT LBP3500 User Manual page 238

■ [Gutter Settings] Dialog Box (See p. 4-57)
The following dialog box is displayed by clicking [Gutter].
This dialog box allows you to specify the width of the gutter and image processing
method.
Setting/Button
[Gutter]
[Image Processing]
■ [Finishing Details] Dialog Box
The following dialog box is displayed by clicking [Finishing Details].
This dialog box allows you to specify various settings for print processing.
Setting/Button
[Print with Upper Left of Sheet
as Starting Point] (See p. 4-59)
Contents
When a value is specified, a margin of white space is
created on one side of the printed paper (This margin
is called [Gutter]). The gutter is useful when binding
pages. Valid values for [Gutter] range from 0 to 30
mm.
When [Gutter] is specified, the position of the page
image is adjusted to make room for the gutter. At this
point, you can select whether to reduce the size of the
image to fit the remaining space.
Contents
Since printing is usually performed with the upper-left
5 mm (15 mm for envelopes) margin within the
printable area of a sheet as the starting point, a
certain portion (lower right) may be missed when
printing data with no margin. If the check box for this
option is selected, printing is performed with the
upper-left 0 mm margin of sheet as the starting point.
Using the Various Printing Functions
4
4-35